en
Hob-based hood control
20
23.8 Data protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the
Home Connect server (initial registration):
¡
Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the Wi-Fi
communication module installed).
¡
Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).
¡
The current software and hardware version of your
appliance.
¡
Status of any previous reset to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use the Home Connect functions for the first time.
Note:
Please note that the Home Connect functions
can only be utilised with the Home Connect app. In-
formation on data protection can be retrieved in the
Home Connect app.
24 Hob-based hood control
If the hob and the extractor hood are Home Connect-
compatible, connect the appliances in the Home Con-
nect app. To do this, connect the two appliances to
Home Connect and follow the instructions in the app.
Notes
¡
Using the controls on the extractor hood always
takes priority. It is not possible to use the hob-based
hood control during this time.
¡
You can only connect to the extractor hood via the
Home Connect app. Other connection routes are no
longer supported.
24.1 Controlling the extractor hood via the
hob
In the basic settings for your hob, you can adjust the
behaviour of your extractor hood depending on
whether the hob or individual cooking zones are
switched on or off.
You can select other settings using the controls on the
hob.
Note:
If you cannot find these settings for your hob,
check the settings of the extractor hood in the
Home Connect app to configure the connection.
Setting the fan
1.
Press .
2.
Use the rotary knob to select a setting.
You can select the following settings:
Fan off
Fan setting 1
Fan setting 2
Fan setting 3
Intensive mode 1
Intensive mode 2
Automatic mode
Note:
Available depending on extractor hood model.
a
The fan is switched on.
3.
To exit fan mode, press .
Setting the hood lighting
You can switch the hood lighting on and off using the
control panel of the hob.
1.
To switch the lighting on, press .
2.
To switch the lighting off, touch again.
24.2 Overview of the hood control settings
In the basic settings for your hob, depending on the extractor hood model, you can adjust the behaviour of your ex-
tractor hood depending on whether the hob or individual cooking zones are switched on or off. If you cannot find
these settings for your hob, check the settings of the extractor hood in the Home Connect app to configure the con-
nection. The display shows this setting only when the appliance has been connected to the extractor hood.
Indicator
Setting
Value
Setting for whether and how the fan switches on
automatically.
Automatic fan start-up
– Switched off. The extractor hood must be
switched on manually, if required.
– Switched on in manual mode. The extractor
hood is switched on at a specified setting when a
cooking zone is switched on.
1
– Switched on in automatic mode. In automatic
mode, the extractor hood switches itself on when
one of the cooking zones is switched on.
2
1
Factory setting
2
Depending on the appliance specifications
