Basic settings
en
17
Display
Setting
Value
Signal tones
- The confirmation signal, the fault signal and the sig-
nal for incorrect use are activated.
- The fault signal activated.
- The confirmation signal and the signal for incorrect
use are activated.
- All signal tones are switched on
1
.
Volume of the audible signals
- Quiet.
– Medium.
– Loud.
1
Assign one of the time-setting programme
functions to on the control panel.
→
"Time-setting options", Page 12
- Switch-off timer.
1
- Timer.
Power limitation
This enables you to limit the total power of
the hob, if required, due to the circum-
stances of your electrical installation. Ob-
serve the regulations of the local electricity
suppliers. The available settings depend on
the maximum power of the hob. You can find
more information on the rating plate. If the
function is switched on and the hob has
reached the set power limit, the required and
permitted power level flashes and you can-
not select a higher power level.
The power is increased by 500 W with each level.
– Switched off. Maximum power of the hob
1
.
- 1000 W. Lowest power setting.
. - 1500 W.
...
- 3000 W.
. - 3500 W.
- 4000 W.
. - 4500 W.
...
- Maximum power of the hob.
Demo mode
Demonstration mode for the hob: When you
switch on the hob,
lights up for a few
seconds and the cooking zones do not heat
up.
- Switched off.
1
- Switched on.
Cookware test
You can use this function to test the quality
of the cookware.
→
- Not suitable.
- Not optimal.
- Suitable.
-
Hob-based hood control
The settings are configured based on the ex-
tractor hood model.
"Overview of the hood control settings", Page 20
Restoring factory settings
- Individual settings
1
.
- Factory settings.
1
Factory setting
21.2 To go to the basic settings
Requirement:
The hob must be switched off.
1.
To switch on the hob, touch .
2.
Within the next 10 seconds, touch and hold for 4
seconds.
Product information
Display
Customer service directory
Production number
Production number 1
Production number 2
a
The first four displays provide the product informa-
tion. Touch to view the individual displays.
3.
Touch to access the basic settings.
a
and light up as a presetting.
4.
Touch repeatedly until the desired setting ap-
pears.
5.
Use the rotary knob to change the desired setting.
6.
Touch and hold for 4 seconds.
a
The settings are saved.
21.3 Discarding changes to the basic
settings
▶
Touch .
a
All changes are discarded and not saved.
