NEFF T58TS6BN0, Instruction Manual

Page: 30 / 44

en
Basic settings
30
To access the basic settings:
The hob must be off.
1.
Switch on the hob.
2.
Within ten seconds, touch and hold the
.
symbol for
approximately three seconds.
The first four displays provide product information.
Turn the twist knob to view the individual displays.
3.
Within ten seconds, touch and hold the
.
symbol for
approximately four seconds.
The first four displays provide product information.
Turn the twist knob to view the individual displays.
4.
Touch the . symbol again to access the basic
settings.
™‚
and
‹
light up as a presetting in the displays.
5.
Touch the
.
symbol repeatedly until the required
function is displayed.
6.
Then use the twist knob to select the required
setting.
7.
Touch the . symbol for at least four seconds.
The settings have been saved.
Leaving the basic settings
Turn off the hob with the main switch.
™‚ˆ
Set air recirculation mode or air extraction mode
‹ Air recirculation mode has been set.*
‚ Air extraction mode has been set.
™‚‰
Set automatic start
‹ Switched off.
‚ Switched on: Automatic mode with sensor control*
ƒ Switched on: The ventilation system starts at a fixed fan setting.
™‚Š Set the sensor sensitivity for the ventilation system
‚ Lowest sensor sensitivity setting.
ƒ Medium sensor sensitivity setting.*
„ Highest sensor sensitivity setting.
™ƒ‹
Set the run-on
‹ Switched off.
‚ Switched on: Automatic function with sensor-controlled run-on.
ƒ Switched on: The ventilation system runs in air extraction mode for approx. 6 minutes and in air recirculation mode for approx.
30 minutes at fan setting ‚ and automatically switches off once this time has elapsed.*
™‹
Restore factory settings
‹ Individual settings.*
‚ Restore factory settings.
Indicator/
symbol
Function
* Factory settings
Product information Display screen
After-sales service index (ASSI)
‹‚
Production number ”š
Production number 1
Š† .
Production number 2
‹ . †