en
Home Connect
38
Notes
■
The
•’ƒ
setting is only displayed if the appliance is
connected to the home network.
■
The
•’„
setting is only displayed if the appliance
has once connected to a network.
■
The
•’†
setting is only displayed if an update is
available.
■
The
•’‡
setting is only displayed if Customer
Service is attempting to connect to the appliance.
You can end this at any time after granting access.
■
The
•’ˆ
and
•’‰
settings are only displayed if
there is a connection to WLAN.
Deactivating Wi-Fi
If Wi-Fi has been activated, you can use the Home
Connect functions.
Note:
In networked standby mode, your appliance requires a
maximum of 2 W.
1.
Switch on the hob.
2.
Touch and hold the
.
symbol for 3 seconds.
The product information is displayed.
3.
Touch the
.
symbol repeatedly until the
•’„
setting appears.
‚
lights up on the cooking position display.
4.
Set the value to
‹
using the twist knob.
This deactivates Wi-Fi; the
D
symbol will go out on the
control panel.
Disconnecting from the network
Disconnecting from the network
You can disconnect your hob from the network at any
time.
Note:
If your hob is disconnected from the network, it is not
possible to operate it using Home Connect.
1.
Switch on the hob.
2.
Touch and hold the
.
symbol for 3 seconds.
The product information is displayed.
3.
Touch the
.
symbol repeatedly until the
•’‚
setting appears.
„
lights up on the cooking position display.
4.
Set the value to
‹
using the twist knob.
This disconnects the appliance from your home
network; the
D
symbol will go out on the control panel.
Connecting to the network
Connecting to the network
1.
Switch on the hob.
2.
Touch and hold the
.
symbol for 3 seconds.
The product information is displayed.
3.
Touch the
.
symbol repeatedly until the
•’‚
setting appears.
‹
lights up on the cooking position display.
4.
Using the twist knob,
set the "Connect automatically"
‚
value or
the "Connect manually"
ƒ
value.
5.
Follow the instructions as per
registration in the home network"
registration in the home network"
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
■
The appliance must be connected to the network.
■
The app must be open and be set up.
•’ˆ
WLAN signal strength
‹
Not connected to home network (WLAN).
‚
Signal strength 1 (poor)
ƒ
Signal strength 2 (moderate)
„
Signal strength 3 (good)
•’‰
Connection to Home Connect server
‹
Not connected.
‚
Connected.
Symbol
Function
* Basic setting
Summary of Contents for T5 L6E Series
Page 1: ...en INSTRUCTION MANUAL INDUCTION HOB WITH INTEGRATED VENTILATION SYSTEM T5 L6E...
Page 2: ...2 cm...
Page 51: ......
