NEFF T5 L6E Series, Instruction Manual

Page: 37 / 52

Home Connect
en
37
Manual registration in the home network
1.
Switch on the hob.
2.
Touch and hold the
.
symbol for 3 seconds.
The product information is displayed.
3.
Touch the
.
symbol repeatedly until the
•’‚
setting appears.
‹
lights up on the cooking position display.
4.
Use the twist knob to set the value to
ƒ
.
In the control panel,
ƒ
and the symbol
D
flash.
5.
Use the "Home Connect" SSID and the "Home
Connect" key to log your mobile device into the hob
network.
If the
D
symbol no longer flashes in the control
panel but, instead, lights up constantly, the hob is
connected to the home network.
The appliance automatically tries to connect to the
app and the setting
•’ƒ
is displayed. The value
‚
flashes in the control panel.
6.
Start the app on the mobile device and follow the
instructions for manual network registration.
The registration procedure has been completed once
the
‹
value appears on the cooking position display.
Home Connect settings
You can adjust Home Connect to suit your
requirements at any time.
In the basic settings for your hob, navigate to the Home
Connect settings to display network and appliance
information.
Symbol Function
•’‚
Registration in the home network (WLAN)
‹
Not connected /disconnect network.
‚
Connect automatically.
ƒ
Connect manually.
„
Connected.
•’ƒ
Connection to app
‹
Not connected.
‚
Connect.
•’„
Connect to WLAN
‹
Radio module switched off.
‚
Radio module switched on.
•’…
Settings via app
‹
Switched off.
‚
Switched on.*
•’†
Software update
‚
Update available and ready for installation.
ƒ
Starting installation.
•’‡
Remote access by Customer Service
‹
Not permitted.
‚
Permitted.
* Basic setting