Time-setting options
en
15
O
Time-setting options
Time-setting options
Your hob has three timer functions:
■
Programming the cooking time
■
Kitchen timer
■
Stopwatch function
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
1.
Select the hotplate and the required heat setting.
2.
Touch the
x
symbol. The
x
display for the
hotplate lights up.
‹‹
lights up on the timer display.
3.
Use the twist knob to select the required cooking
time.
The cooking time begins to elapse.
Note:
The same cooking time can be set automatically
for all hotplates. The set time for each of the hotplates
counts down independently.
You can find information on automatically programming
the cooking time in section
Changing or deleting the time
Select the hotplate and then touch the
x
symbol.
Change the cooking time using the twist knob or on the
control panel or set
‹‹
to delete the programmed
cooking time.
When the time has elapsed
The hotplate switches off. An audible signal sounds,
‹
appears in the hotplate display and
‹‹
appears in the
timer display for one minute. The hotplate indicator
x
flashes.Touch any symbol; the indicators go out and the
audible signal ceases.
Notes
■
If a cooking time was programmed for several
hotplates, the cooking time which ends first appears
in the timer display. The
x
display for the hotplate
lights up.
■
Select the relevant hotplate to call up the remaining
cooking time for a hotplate. The cooking time is
displayed for 10 seconds.
■
You can set a cooking time of up to 99 minutes.
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
How to activate the function
1.
Touch the
.
symbol:
‹‹
and the
b
indicator appear
in the timer display.
2.
Use the twist knob to select the required time.
3.
Touch the
.
symbol again to confirm the selected
time.
The time begins to elapse.
Changing or deleting the time
Touch the
.
symbol and use the twist knob to change
the time or set it to
‹‹
.
When the time has elapsed
An audible signal sounds for one minute and the
‹‹
symbol flashes in the timer display. Touch the
.
symbol again: The displays go out and the audible
signal ceases.
Summary of Contents for T48 T0 Series
Page 2: ...2 cm...
