Twist-Pad with Twist knob
en
11
j
Twist-Pad with Twist knob
Twist-Pad with Twist knob
The twistpad is the area in which you can use the twist
knob to select the hotplates and heat settings. The twist
knob automatically centres itself in the twistpad area.
The twist knob is magnetic and is placed on top of the
twistpad. To activate a hotplate, touch the twist knob at
the level for the required hotplate. Turning the twist
knob selects the heat setting.
Position the twist knob on the twist pad so that it is in
the centre of the indicators which delimit the twist pad
area.
Notes
■
Even if the twist knob is not entirely central, this will
not affect how the twist knob works.
■
Always keep the twist knob clean. Soiling may impair
its function.
Remove the twist knob.
If the twist knob is removed, the "Lock control panel for
cleaning" function is activated.
The twist knob can be removed during cooking. The
"Lock control panel for cleaning" function is activated
for 35 seconds. If the twist knob is not placed back in
position before this time elapses, the hob switches off.
:
Warning – Risk of fire!
If during this 35 seconds a metallic object is placed in
the twistpad area, the hob may continue to heat up.
Therefore, always switch off the hob using the main
switch.
Storing the twist knob
A strong magnet is located inside of the twist knob.
Keep the twist knob away from magnetic data carriers
such as credit cards and cards with magnetic strips.
Otherwise, these data carriers may be damaged
beyond repair.
The magnet could also cause faults on televisions and
screens.
Note:
The twist knob is magnetic. Metal particles stuck
to the bottom could scratch the surface of the hob.
Always clean the twist knob thoroughly.
Operating the hob without the twist knob
The hob can also be operated without the twist knob:
1.
Switch on the hob using the main switch.
2.
Within the next 5 seconds, simultaneously touch and
hold the
œ
and
.
symbols for 4 seconds. An
audible signal will sound.
3.
Touch the
.
symbol repeatedly until the indicator for
the required hotplate lights up.
4.
Then set the required heat setting using the
œ
or
x
symbol.
The hotplate has now been activated.
Notes
■
The timer function cannot be activated without the
twist knob.
■
The twist knob can be placed back on the twistpad
at any time.
Summary of Contents for T48 T0 Series
Page 2: ...2 cm...
