background image

en

    Power manager

26

h

Power manager

Power  manager

You can use the power manager to set the total power 

of the hob.
The hob is preset at the factory. Its maximum 

performance is specified on the rating plate. You can 

use the power manager to change the value in 

accordance with the requirements for the relevant 

electrical installation.
In order not to exceed this set value, the hob 

automatically distributes the power available between 

the cooking zones that are switched on.
As long as the power manager function is activated, the 

output of a cooking zone may temporarily fall below the 

nominal value. If a cooking zone is switched on and the 

power limit is reached, 

¬

 appears in the heat setting 

display for a short time. The appliance automatically 

regulates and selects the highest possible power level.
For more information about how the total power of the 

hob is changed, see section 

~

 "Basic settings"

D

Cleaning

Cleaning

:

Warning – Risk of burns! 

The appliance becomes hot during operation. Allow the 

appliance to cool down before cleaning.

:

Warning – Risk of burns! 

The appliance becomes hot during operation. If hot 

liquids penetrate the appliance, leave the appliance to 

cool before removing the metal grease filter or the 

overflow container.

:

Warning – Risk of electric shock! 

Do not use any high-pressure cleaners or steam 

cleaners, which can result in an electric shock.

:

Warning – Risk of electric shock! 

Penetrating moisture may result in an electric shock. 

Clean the appliance using a damp cloth only. Before 

cleaning, pull out the mains plug or switch off the circuit 

breaker in the fuse box.

:

Warning – Risk of injury! 

Components inside the appliance may have sharp 

edges. Wear protective gloves.

Notes

Only use a minimal amount of water when cleaning 

so that no water enters the appliance.

Before cleaning, remove any jewellery from your 

arms and hands.

Do not use any cleaning agents while the hob is still 

hot. This may mark the surface. Ensure that any 

residue left by cleaning agents is removed.

Cleaning agents

Only use cleaning products that are suitable for this 

type of hob. Follow the manufacturer's instructions on 

the product packaging.
Follow all instructions and warnings included with the 

cleaning products.
Suitable maintenance and cleaning products can be 

purchased from the after-sales service or in our e-Shop.

Caution!
Beware of causing surface damage

Do not use:

Undiluted washing-up liquid

Cleaning products designed for dishwashers

Abrasive cleaning products 

Pressure washers or steam jet cleaners

Oven cleaners

Corrosive or aggressive cleaners, or those 

containing chlorine

Cleaners containing a large percentage of alcohol

Hard, scratchy sponges, brushes or scouring pads

Summary of Contents for T4 D7B Series





































Reviews: