PowerBoost function
en
17
When the time has elapsed
The hotplate switches off. An audible signal sounds.
‹‹
lights up in the timer display for 60 seconds.
Touch the
0
symbol. The displays go out and the
audible signal ceases.
Notes
■
If a cooking time was programmed for several
hotplates, the time information for the selected
hotplate is shown in the timer display.
■
You can set a cooking time of up to 99 minutes.
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting procedure
1.
Touch the
0
symbol repeatedly until the
V
indicator lights up.
‹‹
lights up on the timer display.
2.
Touch the
@
or
A
symbol. The basic setting appears.
@
symbol: 10 minutes.
A
symbol: 5 minutes.
3.
Use the
@
or
A
symbol to set the required time.
After a few seconds, the time begins to count down.
Changing or cancelling the cooking time
Touch the
0
symbol repeatedly until the
V
indicator
lights up. Change or set the time to
‹‹
using the
@
or
A
symbol.
When the time has elapsed
An audible signal sounds.
‹‹
appears in the timer
display. The displays go out after 60 seconds.
By pressing the
0
symbol, the displays go out and the
audible signal ceases.
v
PowerBoost function
PowerBoost function
The PowerBoost function enables you to heat up large
quantities of water faster than when using heat setting
Š
.
This function can always be activated for a hotplate,
provided the other hotplate in the same group is not in
use (see illustration). Otherwise,
˜
and
Š
will flash in
the display for the selected hotplate; the
Š
heat setting
will then be set automatically without activating the
function.
Note:
In the combi zone, the PowerBoost function can
only be activated if the two hotplates are used
independently of each other.
Activation
1.
Select a hotplate.
2.
Touch the
˜
symbol.
˜
lights up on the display.
The function is activated.
Deactivation
1.
Select a hotplate.
2.
Touch the
˜
symbol.
The
˜
display goes out and the hotplate switches
back to the
Š
heat setting.
The function is deactivated.
Note:
In certain circumstances, the PowerBoost
function can switch itself off automatically in order to
protect the electronic elements inside the hob.
