Automatic switch-off
en
35
If a hotplate has been
selected.
Touch twice within
10 seconds.
If a hotplate has not
been selected.
Touch .
a
The indicator lights up.
2.
Use or to set the time.
a
The time counts down.
a
When the time has elapsed, a signal sounds.
lights up on the timer display. The indicator for
the kitchen timer lights up brightly. It switches off
after one minute.
Displaying the time
▶
Select the kitchen timer with .
a
The time is displayed for 10 seconds.
Setting the correct time
1.
Select the kitchen timer with .
2.
Set the required time with or .
Switching off the timer signal
You can switch the signal off manually.
▶
Touch any touch field.
a
The display goes out and the audible signal ceases.
9 Automatic switch-off
If you do not change the settings of a hotplate for a
long time, automatic switch-off will be activated.
When the hotplate switches off depends on the heat
setting selected (1 to 10 hours).
The heat to the hotplate is switched off. and the re-
sidual heat indicator / flash alternately on the hot-
plate display.
9.1 Continuing cooking after automatic
switch-off
1.
Touch any touch field.
a
The display goes out.
2.
Reset.
10 Keep-warm function
The keep-warm function allows you to melt chocolate
or butter and to keep food or cookware warm.
10.1 Switching on the keep-warm function
1.
Select the hotplate.
2.
Touch the symbol.
a
lights up on the heat setting display.
10.2 Switching off the keep-warm function
1.
Select the hotplate.
2.
Touch the symbol.
a
lights up on the heat setting display.
11 Wipe protection
Wiping over the control panel while the hob is switched
on may alter settings. Your hob has a wipe protection
function to prevent this.
The main switch is excluded from the wipe protection
function. You can switch the hob off at any time.
11.1 Activating wipe protection
▶
Touch .
a
A signal sounds.
a
The indicator lamp above lights up.
a
The control panel is locked for 30 seconds.
12 Energy consumption display
This function indicates the total amount of energy con-
sumed between switching the hob on and switching it
off again.
Once switched off, the energy consumption is dis-
played in kilowatt hours, e.g. 1.08 kWh, for
10 seconds.
The accuracy of the display depends on various factors
such as the voltage quality of the power supply.
