NEFF I91VT44N0B, Instruction Manual, Page: 9 / 16

Operating the appliance
en
9
Switching the appliance on and off
Note:
Before you switch on the appliance, open both
fan flaps by pressing on them lightly.
Note:
Always adjust the setting according to the current
conditions. To eliminate strong cooking smells, select a
high fan setting.
Note:
When using pans for cooking, use the
appropriate pan lid. If necessary, place the lid on the
pan at a slight angle, with the gap facing the worktop-
mounted ventilation system. This improves the
extraction behaviour of the table ventilation.
Switching on the appliance
Press the
#
button.
The extractor hood starts at fan setting 1.
The fan setting that is selected will be shown on the
display panel.
Selecting the fan setting
Press the
@
or
A
button to set the corresponding fan
setting.
The fan setting that is selected will be shown on the
display panel.
Switching off the appliance
Press the
#
button.
Intensive setting
Activate intensive mode to eliminate strong smells and
odours. In this mode, the extractor hood operates at its
maximum fan setting for a short time. After a short time,
it automatically switches back to a low setting.
Switching on
Press and hold the
@
button until
˜
appears on the
display panel.
Intensive mode is now activated.
Note:
After 6 minutes, the extractor hood automatically
switches back to the fan setting that was set
beforehand.
Switching off
Press the A button to set a different fan setting.
Run-on function
The run-on function allows the table ventilation to
continue running for a few minutes after it has been
switched off. This eliminates any remaining cooking
smells. The run-on prevents moisture from collecting in
the table ventilation and in the air recirculation in the
cabinet and toe kick. The table ventilation then switches
itself off automatically.
Switching on
Notes
■
If intensive mode has been activated, the run-on
function is not available.
■
The fan flaps must remain closed while the run-on
function is active.
1.
Select the fan setting.
2.
Press the 9 button.
The 9 indicator will light up.The fan will continue to
run at this setting for 15 minutes and then switch off
automatically once this time has elapsed.
Switching off
Press the
#
or
9
button.
This will deactivate the run-on function immediately.