NEFF I91VT44N0B, Instruction Manual, Page: 12 / 16

en
Cleaning and maintenance
12
Cleaning the inside of the appliance
You can remove the fan flaps in order to clean the
appliance thoroughly.
1.
Open the fan flaps.
2.
Remove the magnetic strip from the front end of the
fan flaps.
3.
Now close one of the fan flaps, slightly lift it out of
the holder at the front and then slide it out towards
you. Repeat the process with the other fan flap.
Caution!
Risk of damage when lifting out and setting down
the fan flaps.Pull the fan flaps up to remove them
and make sure that you do not scratch the surfaces
of the appliance.
4.
Once the fan flaps and filter have been removed,
clean the inside of the appliance.
5.
Once you have finished cleaning the appliance, refit
the fan flaps and the magnetic strip and insert the
metal grease filter.
Cleaning the metal mesh grease filters
Notes
■
Do not use any aggressive, acidic or alkaline
cleaning agents.
■
When cleaning the metal mesh grease filters, also
clean the holder for the metal mesh grease filters in
the appliance using a damp cloth.
■
The metal mesh grease filters can be cleaned in the
dishwasher or by hand.
By hand:
Note:
You can use a special grease solvent for
stubborn dirt. It can be ordered via the Online Shop.
■
Soak the metal mesh grease filters in a hot soapy
solution.
■
Clean the filters with a brush and then rinse them
thoroughly.
■
Leave the metal mesh grease filters to drain.