background image

Operating modes    

en

7

Ç

Operating modes

Operating

 modes

Exhaust air mode

Note: 

The air must not be discharged into a flue that is 

used for exhausting fumes from appliances burning gas 

or other fuels (not applicable to appliances that only 

discharge the air back into the room).

Before conveying the exhaust air into a non-

functioning smoke or exhaust gas flue, obtain the 

consent of the heating engineer responsible.

If the exhaust air is conveyed through the outer wall, 

a telescopic wall box should be used.

Air recirculation

Note: 

To bind odours in air recirculation mode, you 

must install an activated carbon filter. The different 

options for operating the appliance in air recirculation 

mode can be found in the brochure. Alternatively, ask 

your dealer. The required accessories are available 

from specialist retailers, from customer service or from 

the Online Shop.

1

Operating the appliance

Operating

 the appl

iance

:

Warning – Risk of burns! 

The appliance will become hot during operation.Allow it 

to cool down before touching the fan flaps and other 

components.

Note: 

Switch on the extractor hood when you start 

cooking and switch it off again several minutes after you 

have finished cooking. This is the most effective way of 

removing the kitchen fumes.

Hob extractor system

The air which is drawn in is cleaned 

by the grease filters and conveyed to 

the exterior by a pipe system.

The air which is drawn in is cleaned by 

the grease filters and an activated 

carbon filter, and is conveyed back into 

the kitchen.

(

Metal grease filter

0

Fan flaps

8

Control panel

Summary of Contents for I91VT44N0B

















Reviews: