14
Installation
0
5.
Screw on the upper and the two lower
fixing brackets.
24
300
mind 550 Elektro
mind 650 Gas
233
471
112
Note:
Take into account any special
accessories that are going to be fitted.
0
6.
Attach the extractor hood.
Adjust the height and align horizontally
with the adjusting screws.
This extractor hood
is intended to be
mounted onto the kitchen wall.
0
1.
Remove the grease filter
(refer to Operating Instructions).
0
2.
Draw a line on the wall from the ceiling
to the lower edge of the hood at the
centre of the location where the hood is
going to be mounted.
0
3.
Use the template to mark the points on
the wall where the screws will be moun-
ted. In order to make it easier to hook
the hood onto the screws, draw the out-
line of the area where the hood will be
attached.
Ensure that the minimum distance bet-
ween the hob and the extractor hood is
maintained –
550 mm
for an electric hob
and
650 mm
for a gas hob. The bottom
edge of the template corresponds to the
lower edge of the extractor hood (glass
screen).
0
4.
Drill 3 x
l
8 mm holes for the extractor
hood and 2 x
l
8 mm holes for the
chimney panelling. Insert plugs into the
holes so that they are flush with the wall.
Summary of Contents for D99W45N0GB
Page 2: ...2 Abb 1 GAZ Fig 1 ELECTRO ...
