background image

5

The most effective method of removing

vapours produced during cooking is to:

Switch the ventilator ON

as soon as you begin cooking.

Switch the ventilator OFF

a few minutes after you have finished
cooking.

Operating procedure

Switching the fan ON

Press the 

+ button.

Setting the required fan speed:

Press the 

+ button.

The fan speed is increased by one step.

Press the 

– button.

The fan speed is reduced by one step.

Switching the fan OFF:

Press the 

0

button.

Or:

Keep pressing the 

button until the fan

switches off.

Intensive setting:

Maximum power is obtained at the 
intensive setting. It is only required for short
intervals.

Keep pressing the 

+

button until a 

ç

appears in the display.

If the intensive setting is not cancelled by
hand, the fan will automatically switch
back to step 

}

after 10 minutes.

Lighting:

The light can be switched on at any
time, even though the fan is switched off.

Fan OFF

Light
ON / OFF

0

Reduce fan
speed

Fan ON and
increase speed
Intensive setting

Display for fan setting

Filters and maintenance

Grease filters:

Metal filters are used to trap the greasy
element of the vapours that develop
during cooking.

The filter mats are made from non-
combustible metal.

Caution:

As the filter becomes more and more 
saturated with grease, not only does the
risk of it catching fire increase but the 
efficiency of the extractor hood can also be
adversely affected.

Important:

By cleaning the metal grease filters at
appropriate intervals, the possibility of them
catching fire as a result of a build-up of heat
such as occurs when deep-fat frying or 
roasting is taking place, is reduced.

Cleaning the metal grease filters:

In normal operation (1 to 2 hours daily),
the metal grease filter must be cleaned 
1 x a month.

The filters can be cleaned in a dish-
washer. It is however possible that they
will become slightly discoloured.

The filter must be placed loosely, and
NOT wedged, in the dishwasher.

Important:

Metal filters that are saturated with 
grease should not be washed together
with other dishes etc.

When cleaning the filters by hand, soak
them in hot soapy water first of all.
Do not use aggressive, acidic or caustic
cleaners.
Then brush the filters clean, rinse them
thoroughly and leave the water to drain off.

Summary of Contents for D86M35N0GB

















Reviews: