background image

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Cleaning and maintenance       

en

7

Removing metal grease filter

1.

Open the lock and swing down the metal grease 

filter. When you do this, take hold of the metal 

grease filter from underneath with your other hand.

2.

Take the metal grease filter out of the holder.

Notes

– Fat may accumulate in the bottom of the metal 

grease filter.

– Hold the metal grease filter level to prevent fat 

from dripping out.

Cleaning the metal mesh grease filters

These instructions apply to several appliance variants. It 

is possible that individual features are described which 

do not apply to your appliance.

:

Warning – Risk of fire! 

Grease deposits in the grease filter may catch fire.

Clean the grease filter at least every 2 months. 

Never operate the appliance without the grease filter.

Notes

Do not use any aggressive, acidic or alkaline 

cleaning agents.

When cleaning the metal mesh grease filters, also 

clean the holder for the metal mesh grease filters in 

the appliance using a damp cloth.

The metal mesh grease filters can be cleaned in the 

dishwasher or by hand.

By hand:

Note: 

You can use a special grease solvent for 

stubborn dirt. It can be ordered via the Online Shop.

Soak the metal mesh grease filters in a hot soapy 

solution. 

Clean the filters with a brush and then rinse them 

thoroughly.

Leave the metal mesh grease filters to drain.

In the dishwasher:

Note: 

If the metal mesh grease filters are cleaned in the 

dishwasher, slight discolouration may occur. This has 

no effect on the function of the metal mesh grease 

filters.

Do not clean heavily soiled metal mesh grease filters 

together with utensils.

Place the metal mesh grease filters loosely in the 

dishwasher. The metal mesh grease filters must not 

be wedged in.

Installing the metal mesh grease filter

:

Warning – Risk of injury! 

Components inside the appliance may have sharp 

edges. Wear protective gloves.

Note: 

Clean all accessible parts of the housing.

Insert the metal grease filter and lock it in place. When 

you do this, take hold of the metal grease filter from 

underneath with your other hand.

Note: 

Make sure that the metal grease filter is 

positioned correctly.

Summary of Contents for D5655X1


















Reviews: