NEFF C87FS32 0B Series, Instruction Manual

Page: 14 / 60

en
Before using for the first time
14
Opening and closing the appliance door
Opening the appliance door
Note:
The door handle will remain open if you do not
close it.
1.
Press the top of the door handle until it opens
(fig.
!
).
2.
Pull the door handle towards you until the appliance
door opens (fig.
"
).
Closing the appliance door
1.
Pull the door handle up until the appliance door
closes.
2.
Push the door handle down until it closes.
Initial use
As soon as the appliance is connected to the power
supply, the first setting "Language" appears on the
display.
Setting the language
1.
Use the
&
button to navigate to the bottom line.
2.
Use the
(
or
)
button to select the language.
3.
Use the
%
button to return to "Language".
4.
Use the
)
button to select the next setting.
Setting the time
1.
Use the
&
button to navigate to the bottom line.
2.
Use the
(
or
)
button to select the current hour.
3.
Use the
&
button to navigate to the next line.
4.
Use the
(
or
)
button to select the current minute.
5.
Press the
%
button repeatedly until "Time" appears.
6.
Use the
)
button to select the next setting.
Setting the date
1.
Use the
&
button to navigate to the bottom line.
2.
Use the
(
or
)
button to select the current day.
3.
Use the
&
button to navigate to the next line.
4.
Use the
(
or
)
button to select the current month.
5.
Use the
&
button to navigate to the next line.
6.
Use the
(
or
)
button to select the current year.
7.
Press the
%
button repeatedly until "Date" appears.
8.
Use the
)
button to select the next setting.
Setting the water hardness
1.
Use the
&
button to navigate to the bottom line.
2.
Use the
(
or
)
button to select the water hardness
range.
3.
Use the
%
button to return to "Water hardness".
4.
Use the
)
button to apply the settings.
The initial use is complete.
Notes
■
You can change these settings at any time in the
basic settings.
~
"Basic settings" on page 23
■
After connecting the appliance to the power or
following a power cut, the settings for initial use are
shown in the display.
Calibrating the appliance and cleaning the
cooking compartment
The boiling point of water depends on the air pressure.
During calibration, the appliance self-adjusts to the
pressure ratio at the installation location. This will
happen automatically the first time steam-assisted
cooking is used. This produces a lot of steam.
Preparing the appliance for calibration
1.
Remove the accessories from the cooking
compartment.
2.
Remove any leftover packaging, such as polystyrene
pellets, from the cooking compartment.
3.
Before calibrating the appliance, wipe the smooth
surfaces in the cooking compartment with a soft,
damp cloth.
Calibrating the appliance and cleaning the cooking
compartment
Notes
■
Calibration cannot be started until the cooking
compartment is cold (room temperature).
■
Do not open the appliance door while calibration is
in progress, as this will abort the calibration process.
1.
Use the
#
touch button to switch on the appliance.
2.
Fill the water tank.
~
"Filling the water tank"
on page 19
3.
Set the specified type of heating, temperature and
duration for the calibration, then start the appliance.
~
"FullSteam – Steam cooking" on page 17
4.
Heat up the appliance following calibration.
Caution!
Enamel damage
Do not use the appliance if there is water on the
cooking compartment floor. Before using the
appliance, wipe away the water from the cooking
compartment floor.
5.
Dry the cooking compartment floor.
2 1
Calibration
Type of heating Steam
‹
Temperature 100 °C
Cooking time 30 minutes