NEFF C17MS22N0, User Manual And Installation Instructions

Page: 15 / 44

Microwave
en
15
Cookware and ac-
cessories Information
Metal cookware and
bakeware Metal can be used with Micro-
Combi.
Note:
Metal must be kept at
least 2 cm from the cooking
compartment walls and the in-
side of the door.
Accessories sup-
plied:
¡
Wire rack
¡
Universal pan
The supplied accessory is suit-
able for MicroCombi. No
sparks are created.
Testing cookware for microwave suitability
If you are unsure whether your cookware is suitable for
use in the microwave, carry out a cookware test.
ATTENTION!
Operating the appliance without food in the cooking
compartment may lead to overloading.
▶
Do not switch on the microwave unless there is food
inside. The only exception to this rule is when per-
forming a short cookware test.
WARNING ‒ Risk of burns!
The accessible parts of the appliance become hot dur-
ing operation.
▶
Never touch these hot parts.
▶
Keep children at a safe distance.
1. Place the empty cookware in the cooking compart-
ment.
2. Set the appliance to run for 30 seconds to 1 minute
at maximum power.
3. Start the operation.
4.
Check the cookware several times:
‒
If the cookware remains cold or warm to the
touch, it is suitable for microwave use.
‒
If the cookware becomes hot or sparks are cre-
ated, stop the cookware test. The cookware is
not microwave-safe.
9.2 Microwave
You can use the microwave to cook, heat up or defrost
food quickly.
Configuring the microwave settings
Notes
¡
Note the correct way to operate the microwave:
–
→ "Safety", Page 2
–
→ "Preventing material damage", Page 6
–
→ "Microwave power settings", Page 10
–
→ "Cookware and accessories with microwave",
Page 14
¡
To prevent condensation, when the microwave
power setting is 600 watts (max), the appliance
automatically switches on a heating element. The
cooking compartment and the accessories become
hot. The cooking result is not affected by this.
You can switch off this drying function in the basic
settings.
→
"Basic settings", Page 19
WARNING ‒ Risk of burns!
At the highest settings in microwave only mode, the
drying function will automatically switch on an addi-
tional heating element to heat the cooking compart-
ment.
▶
Never touch the inside surfaces of the cooking com-
partment or the heating elements while they are hot.
▶
Keep children at a safe distance.
1.
Use ​⁠ to switch the appliance on.
2.
Press ​⁠.
3.
Configure the settings for the "microwave" ​⁠ using ​⁠
or ​⁠.
4.
Use ​⁠ to navigate to the next row.
a
A microwave power setting and a cooking time ap-
pear.
5.
Use ​⁠ or ​⁠ to select a microwave power setting.
6.
Use ​⁠ to navigate to the next row.
7.
Use ​⁠ or ​⁠ to select the required cooking time.
8.
Use ​⁠ to start the microwave.
a The microwave starts and the cooking time counts
down. The heat-up bar does not appear.
a Once the cooking time has elapsed, an audible sig-
nal sounds and the appliance stops heating.
9. Press any button to end the signal tone.
‒
If necessary, set the microwave power setting
and cooking time again.
‒
When the food is ready, use ​⁠ to switch the ap-
pliance off.
10.
If you have switched off the drying function for the
microwave in the basic settings, dry the cooking
compartment.
Note:
If you open the appliance door during operation,
the operation stops. When you close the appliance
door, you must press ​⁠ to continue the operation. If
you have changed the basic setting for this, make sure
that the microwave does not resume operation without
food inside.
→
"Basic settings", Page 19
Changing the microwave power setting
If you change the microwave power setting, the cook-
ing time is reset.
1.
Press ​⁠ to pause operation.
2.
Use ​⁠ or ​⁠ to select the required microwave power
setting.
3.
Use ​⁠ to navigate to the next row.
4.
Use ​⁠ or ​⁠ to select the cooking time.
5.
Use ​⁠ to start the microwave.
Changing the cooking time
1.
Press ​⁠.
2. Use ​⁠ or ​⁠ to change the cooking time.
a
The setting is applied.