NEFF C17MS22N0, User Manual And Installation Instructions

Page: 12 / 44

en
Before using for the first time
12
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Initial use
When the appliance is connected to the power supply
for the first time or following a lengthy power failure, the
settings that you will need to configure before you can
use it will appear.
Note:
You can change these settings at any time by
going to the basic settings.
→
"Basic settings", Page 19
Setting the language
1.
Connect the appliance to the power supply.
a
The first setting will appear after a few seconds.
2.
Use the ​⁠ button to navigate to the bottom row.
3.
Use the ​⁠ or ​⁠ button to select the language.
4.
Use the ​⁠ button to navigate back to the top row.
5.
Use the ​⁠ button to select the next setting.
Setting the time
1.
Use the ​⁠ button to navigate to the bottom row.
2.
Use the ​⁠ or ​⁠ button to select the correct hour.
3.
Use the ​⁠ button to navigate to the next row.
4.
Use the ​⁠ or ​⁠ button to select the correct number of
minutes.
5.
Use the ​⁠ button to navigate back to the top row.
6.
Use the ​⁠ button to select the next setting.
Setting the date
1.
Use the ​⁠ button to navigate to the next row.
2.
Use the ​⁠ or ​⁠ button to select the correct day.
3.
Use the ​⁠ button to navigate to the next row.
4.
Use the ​⁠ or ​⁠ button to select the correct month.
5.
Use the ​⁠ button to navigate to the next row.
6.
Use the ​⁠ or ​⁠ button to select the correct year.
7.
Press the ​⁠ button repeatedly until "Date" appears.
8.
Use the ​⁠ button to apply the settings.
7 Basic operation
7.1 Switching on the appliance
▶
Press ​⁠ to switch the appliance on.
Notes
¡
In the basic settings, you can specify whether the
heating functions or the main menu should appear
when you switch on the appliance.
→
"Basic settings", Page 19
¡
If you do not perform any actions on the appliance
for an extended period, it will automatically switch it-
self off.
7.2 Switching off the appliance
▶
Press ​⁠ to switch the appliance off.
Notes
¡
The residual heat indicator will appear on the dis-
play while the cooking compartment is still hot.
→
"Residual heat indicator", Page 12
¡
The cooling fan will continue to run until the cooking
compartment has cooled down.
→
"Cooling fan", Page 10
7.3 Residual heat indicator
After you have switched off the appliance, the residual
heat indicator will appear on the display.
Display Temperature
Residual heat high Over 120 °C
Residual heat low Between 60 and 120 °C
7.4 Setting the type of heating and
temperature
1.
Press ​⁠ to switch the appliance on.
a
The heating functions will then be displayed.
2.
Use the ​⁠ or ​⁠ button to select the required heating
function.
3.
Use the ​⁠ button to navigate to the next row.
4.
Use the ​⁠ or ​⁠ button to select the required temperat-
ure or setting.
5.
Press ​⁠ to start.
a
The cooking time will appear on the display.
a
The heat-up indicator bar visualises the rising tem-
perature.
6.
When the food is ready, press ​⁠ to switch the appli-
ance off.
7.5 Changing the temperature
You can also change the temperature once you have
started the appliance.
1.
Use the ​⁠ or ​⁠ button to select the temperature
row.
2.
Use the ​⁠ or ​⁠ button to select the required temperat-
ure.
a
The temperature will now be changed.
7.6 Changing the type of heating
If you switch to a different heating function, the appli-
ance will reset all the settings.
1. Press ​⁠ to pause operation.
2.
Use the ​⁠ or ​⁠ button to select the required heating
function.
3.
Use the ​⁠ button to navigate to the next row.
4. Use the ​⁠ or ​⁠ button to select the required temperat-
ure.
5. Press ​⁠ to start.
7.7 Pausing operation
1.
Press ​⁠.
2.
Press ​⁠ again to resume operation.