NEFF B48FT38 0B Series, Instruction Manual

Page: 14 / 60

en
Operating the appliance
14
4.
After calibration, allow the appliance to heat up.
Caution!
Enamel damage
Do not start an operation if water is on the cooking
compartment floor. Before the operation, wipe the
water from the cooking compartment floor.
5.
Dry the cooking compartment floor.
6.
Set the heating type and temperature for heating up,
then start the appliance operation.
~
"Setting and
starting the appliance operation" on page 15
7.
Keep the kitchen ventilated while the appliance is
heating up.
8.
Stop the appliance operation after the indicated
duration. Use the
#
touch button to switch off the
appliance.
9.
Wait until the cooking compartment has cooled
down.
10.
Clean the smooth surfaces with soapy water and a
dish cloth.
11.
Empty the water tank and dry the cooking
compartment.
~
"After every steam operation"
on page 19
Notes
■
So that the appliance adapts to a new installation
location after moving house, reset the appliance to
the factory settings. Repeat the initial use settings
and the calibration.
■
The appliance saves the calibration settings, even in
the event of a power cut or disconnection from the
mains.The calibration must not be repeated.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
1
Operating the appliance
Operating the appl iance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
To switch the appliance on or off, touch the
#
touch
button.
After the appliance has switched off, the display shows
whether the residual heat in the cooking compartment
is high or low.
Notes
■
Certain indicators and instructions (e.g. about
residual heat in the cooking compartment) remain
visible on the display even when the appliance is
switched off.
■
After the appliance has completed an operation, you
will hear the cooling fan continuing to run until the
cooking compartment is cooled as much as
possible.
■
Switch off your appliance when you do not need to
use it. If no settings are made for a long time, the
appliance switches off automatically.
Heating up
Heating type Top/bottom heating
ƒ
Temperature 240 °C
Cooking time 30 minutes
Display Temperature
Residual heat high above 120 °C
Residual heat low between 60 °C und 120 °C