12
Timer
1.
Press the
KJ
clock function button repeatedly until the
KJ
and
Q
symbols light up.
2.
Set the duration using the rotary selector (e.g.
†
:
‹‹
minutes).
The setting is applied automatically. Then the clock is
displayed again and the minute minder starts counting down.
Cooking time
Automatic switch-off after a cooking time setting has elapsed.
1.
Set the operating mode and temperature.
2.
Press the
KJ
clock function button repeatedly until the
KJ
and
x
symbols light up.
3.
Set the cooking time with the rotary selector
(e.g.
‚
:
„‹
hours).
The setting is applied automatically. The time of day is then
displayed again.
4.
Press the
ƒ
Start button.
The appliance heats up and the set cooking time starts
counting down.
Once the cooking time has elapsed, the appliance switches off
automatically.
Turn the operating mode selector to the
Û
position and push it
in.
End of operation
Automatic switch-off at a set time.
1.
Set the operating mode and temperature.
2.
Press the
KJ
clock function button repeatedly until the
KJ
and
y
symbols light up.
3.
Set the end of operation using the rotary selector
(e.g.
‚ƒ
:
„‹
o'clock).
The setting is applied automatically. The time of day is then
displayed again.
4.
Press the
ƒ
Start button.
The appliance heats up.
Once the cooking time has elapsed, the appliance switches off
automatically.
Turn the operating mode selector to the
Û
position and push it
in.
Preset operation
The appliance switches on automatically, then switches off
automatically at the time preselected for the end of operation.
To set this function, combine the cooking time and end of
operation clock functions.
Bear in mind that food which spoils easily should not be left in
the cooking compartment for too long.
1.
Set the operating mode and temperature.
2.
Press the
KJ
clock function button repeatedly until the
KJ
and
x
symbols light up.
3.
Set the cooking time with the rotary selector
(e.g.
‚
:
„‹
hours).
The setting is applied automatically.
4.
Press the
KJ
clock function button repeatedly until the
KJ
and
y
symbols light up.
5.
Set the end of operation using the rotary selector
(e.g.
‚ƒ
:
„‹
o'clock).
6.
Press the
ƒ
Start button.
The appliance switches off and waits until the appropriate
time to switch on (
‚‚
:
‹‹
in the example). The appliance
switches off automatically at the time set for the end of
operation (
‚ƒ
:
„‹
). A signal sounds and the
y
symbol
flashes.
7.
Turn the operating mode selector to the
Û
position and push
it in.
Setting the clock
You can only change the clock when no other clock function is
active.
1.
Press the
KJ
clock function button repeatedly until
the
KJ
and
3
symbols light up.
2.
Set the clock using the rotary selector.
The setting is applied automatically.
