Page 7 of 13
Installation
The EcHo Plus can be installed in standard electrical back boxes or by using mounting brackets.
Each model (DK, US, EU) fits in typical boxes matching specific installation requirements for the
country of sale.
1.
Prepare the installation site by installing the needed back box or brackets. Pull the needed
cables through the back box or bracket.
2.
Mount the supplied connectors to the cables as needed and connect to the control
system.
3.
Mount the control system in the back box or on the bracket:
DK version
Insert a flathead screwdriver gently and pry out the front cover. Remove the
front cover and the paper label behind it.
Insert a flathead screwdriver into the button. Gently push and pry out the button.
Insert the control system in a frame matching the back box used.
Insert screws (not supplied) matching the back box into the two holes. Secure the
control system to the back box without overtightening the screws.
Remount the paper label, insert a printed transparent label showing the button func-
tions, and mount the front cover. Note that the front cover mounts in only one direc-
tion.
Flathead screwdriver
Paper label
Transparent label
Front cover
