4
a
Quick start guide
Bluetooth® Speaker Set
SPBT6100BK
For more information see the extended manual online:
ned.is/spbt6100bk
Intended use
This product is a pair of stereo Bluetooth® speakers intended to
stream audio from your media device via Bluetooth® or an audio
cable.
This product is intended for indoor and outdoor use.
This product is not intended for professional use.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Main parts
(image
A
)
1
Main speaker
2
Second speaker
3
RCA inputs
4
AUX input (main speaker
only)
5
Power cable
6
Remote
7
3.5 mm audio cable
8
RCA cable
9
Speaker cable
Using the remote
(image
B
)
1
Power button
2
Mute button
3
Volume up button
4
Previous track button
5
Start/pause button
6
Mode button
7
EQ button
8
Bass button
9
Next track button
q
Volume down button
w
Battery compartment
Power button
B
1
Switch the product on and off.
Mute button
B
2
Mute the speakers.
Volume up button
B
3
Increase the audio volume.
Previous track button
B
4
Skip to the previous track.
Start/pause button
B
5
Start and pause the current
track.
Mode button
B
6
Switch between Bluetooth®
and AUX mode.
EQ button
B
7
Cycle though audio profiles;
Flat, Jazz, Rock and Pop.
Bass button
B
8
Increase the bass by dB.
Next track button
B
9
Skip to the next track.
Volume down button
B
q
Decrease the audio volume.
Battery compartment
B
w
Safety instructions
-
WARNING
•
Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep the
packaging and this document for future reference.
•
Only use the product as described in this document.
•
Do not open the product, there are no user serviceable parts
inside.
•
Do not use the product if a part is damaged or defective.
Replace a damaged or defective product immediately.
•
Disconnect the product from the power source and other
equipment if problems occur.
•
Do not drop the product and avoid bumping.
•
This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
•
Do not expose the product to high pressure water or moisture.
•
Do not immerse the product in water.
•
Do not expose the product to direct sunlight, naked flames or
heat.
•
Extended exposure to high volumes can cause hearing loss.
Connecting the speakers
Connect the speakers with the RCA cable
A
8
or speaker cable
A
9
.
Option A: RCA cable
1. Remove the rubber caps from the RCA inputs
A
3
on both
speakers.
2. Plug the red plugs of the RCA cable
A
8
into the red RCA cable
inputs
A
3
on both speakers.
3. Plug the black plugs of the RCA cable
A
8
into the black RCA
cable inputs
A
3
on both speakers.
Option B: Speaker cable
Twist the exposed wire between your fingers to clean up the ends.
Make sure no ends of the speaker cable
A
9
are frayed.
1. Turn the RCA cable inputs
A
3
on both speakers counter
clockwise to loosen the connectors.
2. Wind the exposed ends of the speaker cable
A
9
around the
metal part between the washers of both red RCA cable input
A
3
connectors.
3. Wind the exposed ends of the speaker cable
A
9
around the
metal part between the washers of both black RCA cable inputs
A
3
.
4. Turn the RCA cable inputs
A
3
on both speakers clockwise to
secure the speaker cable
A
9
to the connectors.
Placing the batteries
1. Open the battery compartment
B
w
.
2. Place the batteries.
-
Use only size AAA batteries (not included) for this product.
-
Observe the plus (+) and minus (–) marks on the battery and
the product to ensure correct placement.
3. Close the battery compartment
B
w
.
Switching on the product
-
Connect the speakers to each other before switching on the
product. See paragraph “Connecting the speakers”.
1. Plug the power cable
A
5
into a power outlet.
2. Press the power button
B
1
to switch on the product.
Press the power button
B
1
to switch off the product.
