5
Spraying a burst of steam
1. Set the thermostat dial
A
r
to the second or third position.
2. Set the steam selector
A
4
to the maximum position.
3. Press the burst button
A
2
to spray a burst of steam.
4
Wait at least 5 seconds between bursts of steam.
4
Do not use the steam burst button for more than 5 consecutive
seconds.
4
Hold the product vertical and use bursts of steam to remove
creases from hanging fabric.
Spraying a spray of steam
Press the spray button
A
3
to spray steam.
After use
1. Set the thermostat dial
A
r
to the minimum position.
2. Place the product on the back cover
A
w
.
3. Unplug the power cable
A
1
from the power outlet.
Troubleshooting
Problem
Possible cause
Possible solution
The product doesn’t
produce heat.
The thermostat
dial
A
r
is rotated
to
OFF
.
Set the thermostat
dial
A
r
to the
correct setting for
your fabric.
The product is not
plugged in.
Plug the power
cable
A
1
into a
power outlet.
The burst of steam
doesn’t function.
The burst of steam
function has been
used to often.
Continue ironing in
horizontal position
and wait a while
before using the
burst of steam
function again.
The water reservoir
A
6
is empty.
Fill the water
reservoir
A
6
with
distilled water.
The ironing plate
A
8
leaks water.
The thermostat dial
A
r
is out of the
steam range.
Set the thermostat
dial
A
r
to the third
position.
The product has not
fully heated up yet.
Wait until the LED
indicator
A
e
switches off to
indicate the product
is heated up.
The amount of
water exceeds the
MAX
indicator of
the water reservoir
A
6
.
Pour out the excess
water from the
water reservoir
A
6
.
The product doesn’t
produce enough
steam.
Set the steam
selector
A
4
to
0
.
Set the steam
selector
A
4
to
the desired steam
output.
The steam holes
A
9
are blocked.
Clean the steam
holes
A
9
with
distilled water.
The water reservoir
A
6
is empty.
Fill the water
reservoir
A
6
with
distilled water.
The spray nozzle
A
7
doesn’t spray.
There is not enough
pressure or air inside
of the product.
1. Push the spray
nozzle
A
7
by
hand.
2. Push the spray
button
A
3
multiple times.
Cleaning the product
-
Disconnect the product before cleaning.
-
Before cleaning and maintenance, switch off the product and
disconnect the power. Let the product cool down completely.
-
Do not use aggressive chemical cleaning agents such as
ammonia, acid or acetone when cleaning the product.
-
Do not clean the inside of the product.
-
Disconnect the product from the power source before service
and when replacing parts.
1. Clean the product regularly with a soft, clean, dry cloth. Avoid
abrasives that can damage the surface.
2. Clean the ironing plate
A
8
with a damp cloth and a non-
abrasive cleaner.
3. Clean the ironing plate
A
8
with a damp cloth with vinegar if
fiber is stuck to the ironing plate
A
8
.
4. Remove any limescale from the steam holes
A
9
with a
toothpick.
5. Empty the water reservoir
A
6
.
4
To remove all water from the water reservoir
A
6
and product,
connect the product to a power outlet and set the thermostat
dial
A
r
to the maximum position for two minutes.
4
The built-in anti-scale cartridge reduces the build-up of limescale.
The built-in anti-scale cartridge does not stop the natural process
of limescale build-up.
Self-cleaning function
Use the self-cleaning function once every two weeks.
4
Use distilled water.
1. Fill the measuring cup
A
y
with water.
2. Open the water reservoir cover
A
5
.
3. Empty the measuring cup
A
y
into the water reservoir
A
6
.
4. Close the water reservoir cover
A
5
.
5. Place the product on the back cover
A
w
.
6. Plug the power cable
A
1
into a power outlet.
7. Set the thermostat dial
A
r
to the maximum position.
Wait until the LED indicator
A
e
switches off to indicate the product
is heated up.
8. Unplug the power cable
A
1
from the power outlet.
9. Hold the product horizontally above the sink.
10. Press and hold the self-cleaning button
A
t
until the water
reservoir
A
6
is empty.
Boiling water and steam ejects to remove the impurities from the
steam holes
A
9
.
11. Plug the power cable
A
1
into a power outlet.
12. Iron an old piece of cloth to dry the ironing plate
A
8
.
13. Unplug the power cable
A
1
from the power outlet.
Disposal
The product is designated for separate collection at
an appropriate collection point. Do not dispose of the
product with household waste.
For more information, contact the retailer or the local
authority responsible for the waste management.
c
Kurzanleitung
Dampfbügeleisen
IRON2000
Weitere Informationen finden Sie in der erweiterten
Anleitung online:
ned.is/iron2000
Bestimmungsgemäße Verwendung
Dieses Produkt ist ein Dampfbügeleisen, das für eine breite Auswahl
von Stoffen verwendet werden kann.
Dieses Produkt ist mit einem Tropfschutzsystem ausgestattet, das
verhindert, dass Wasser aus der Bügelsohle austritt, wenn das
Produkt kalt ist.