Installation 1: Powered by DTV set-top box (Fig.6)
Please be noticed, in this installation, you need to make sure that your
set-top box can
support coaxial cable 5V DC powering via the IEC or F connector to
antenna.
Step1.
Connect the coaxial cable with antenna and DTV set-top box
Step2.
Connect the DTV set-top box to your TV. Please make sure
the coaxial cable powering function of your STB is ON. (Please check
The operational manual of your STB for coaxial cable powering
function)
Step3.
Check the LED on the antenna. If the LED is not lighted on,
please go back to
Step2
.
Step4.
Adjust the antenna in the best position that can get clear TV
picture, then fix the antenna
Step5.
Organize the coaxial cable for neat, tidy and safety.
Step1.
Connect the coaxial cable with antenna and the power insert
(the side with “antenna” text mark).
Setp2.
Connect the other side of power insert to DTV set-top box.
Step3.
Connect the DTV set-top box to your TV
Step4.
Connect the power adapter DC output jack to the DC input
connector of the Power insert, and then plug the AC/DC power
adapter into the AC power socket.
Step5.
Check the LED on the antenna. If the LED is not lighted on,
please go back to
Step4
.
Step6.
Adjust the antenna in the best position that can get clear TV
picture, then fix the antenna
Step7.
Organize the Coaxial Cable for neat, tidy and safety.
Installation 2: Powered by AC/DC adapter (Fig.7)
5V 40mA
(Fig.6)
(Fig.7)
Fig.4
Fig.5
Please take reference of following 2 different positioning way to adjust the antenna position.
(Fig.4)
through the fixing screw A to adjust the antenna position in vertical direction
(Fig.5)
through the fixing screw B to adjust the antenna position left or right in horizontal direction
Fixing screw B
Fixing screw A
Contact
NEDIS B.V., De Tweeling 28, 5215 MC ‘s-Hertogenbosch, The Netherlands