Nederman L-PAK 150, Instruction Manual

Page: 8 / 19

L-PAK 150/250 Advanced
5.1.4 Idling (Idling mode)
The unit is in Idling mode. The pump motor is on, there is no vacuum, and the FCV is open. The unit goes into
Idling mode when there has been no pilot signal for the time set in DIR_Time, see
Section 6.2.5 DIR_Time .
ESC OK
Hi Vacuum Unit
IDLING
Time To
StandBy
05:33m
Time to Standby: The amount of time until the unit goes into Standby mode.
The default setting is 12 minutes. See
Section 6.2.4 SSR_Time .
5.1.5 Filter Cleaning
The unit is cleaning its filter.
ESC OK
Filter
Cleanining
Cycles 1
Elapsed 0
Clean 00:00 s
Charge 00:00 s
Cycles: How many cleaning pulses will be carried out.
Elapsed: How many cleaning pulses are made.
Clean: Remaining time for cleaning pulse.
Charge: Remaining vacuum build time; the time until cleaning pulse is activ-
ated.
8