FE840/FE841
EN
The coarse separator usually needs to be emptied
only when the filter is changed, but heavy use of
some types of electrodes may call for more frequent
emptying.
See
1
Switch off the unit. Remove the suction hose.
2
Loosen the filter indicator hose (B) (only units
with automatic mode).
3
Turn down the handle (A) and remove the coarse
separator (C). The handle works as a lock for the
coarse separator.
4
Pull out and dispose the old filter.
5
Insert a new filter.
6
Unscrew the locking screw (D) and remove the
outer part.
7
Empty the coarse separator.
8
Check the rubber seal around the separator for
any signs of damage.
9
Reassemble the coarse separator. Lock with the
handle.
NOTE!
The coarse separator is partly locked when
the handle is in an upright position, and
fully locked when it is turned down.
6 Spare Parts
CAUTION! Risk of equipment damage
Use only N
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
original spare parts and ac-
cessories.
Contact your nearest authorized distributor or
N
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
for advice on technical service or
if you require help with spare parts. See also
w
$
w
$
w
$
.
$
n
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
.
$
c
$
o
$
m
$
.
6.1 Ordering spare parts
When ordering spare parts always state the following:
• The part number and control number (see the
product identification plate).
• Detail number and name of the spare part (see
w
$
w
$
w
$
.
$
n
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
.
$
c
$
o
$
m
$
/
$
e
$
n
$
/
$
s
$
e
$
r
$
v
$
i
$
c
$
e
$
/
$
s
$
p
$
a
$
r
$
e
$
-
$
p
$
a
$
r
$
t
$
-
$
s
$
e
$
a
$
r
$
c
$
h
$
).
• Quantity of the parts required.
7 Recycling
The product has been designed for component mater-
ials to be recycled. Different material types must be
handled according to relevant local regulations. Con-
tact the distributor or
$
N
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
if uncertainties arise
when scrapping the product at the end of its service
life.
14
