Nederman A EX 2GD, Instruction Manual And Users Manual

Page: 17 / 212

A EX 2GD - Vacuum Cleaners
17
EN
Table 4-4: Filter data, see also Figures 2,3 & 4.
Part number Area (A)
(m²)
Diameter (D)
(mm)
Length (L)
(mm)
Material EN 60335-2-69/
EN1822
Max.temp.
(°C)
Washable**
Cartridge filter* (Figure 2)
43120100 2,38 264 220 Cellulose M 70 -
43120101 2,38 264 220 Cellulose M 70 -
43120200 1,56 264 220 Cellulose/Glassfiber/ Cellulose 3 layers H13 70 -
43120201 1,00 150 230 Cellulose/Glassfiber 2 layers H13 70 -
43120300 2,28 264 220 Polyester M 110 OK
43120302 2,38 264 220 Antistatic Polyester M 120 OK
43120303 10,00 264 870 Antistatic Polyester M 120 OK
43120304 2,38 264 220 Polyester M 110 OK
43120400 0,70 338 42 Cellulose M 70 -
43130001 2,38 264 220 Cellulose M 70 -
43130100 2,38 264 220 Cellulose M 70 -
43130200 5,40 264 470 Cellulose M 70 -
43130201 5,40 264 470 Cellulose M 70 -
43130300 6,90 264 600 Cellulose M 70 -
43130301 6,90 264 600 Cellulose M 70 -
43130400 10,00 264 870 Cellulose M 70 -
43130401 10,00 264 870 Cellulose M 70 -
43130500 1,56 264 220 Cellulose/Glassfiber/ Cellulose 3 layers H13 70 -
43130700 3,50 264 470 Cellulose/Glassfiber/ Cellulose 3 layers H13 70 -
43130702 3,50 264 470 Cellulose/Glassfiber/ Cellulose 3 layers H13 70 -
43130800 4,50 264 600 Cellulose/Glassfiber/ Cellulose 3 layers H13 70 -
43130801 4,50 264 600 Cellulose/Glassfiber/ Cellulose 3 layers H13 70 -
43130900 6,50 264 870 Cellulose/Glassfiber/ Cellulose 3 layers H13 70 -
43130901 6,50 264 870 Cellulose/Glassfiber/ Cellulose 3 layers H13 70 -
Filter bags (Figure 3)
43110001 0,50 x x Polypropylene M 70 -
43110100 0,35 x x Polyester M 120 -
43110200 0,35 x x Antistatic Polyester M 120 -
43110300 0,59 x x Polyester M 120 -
43110400 0,59 x x Antistatic Polyester M 120 -
*See label on filter for part number.
**Replace the cartridge filter after it has been washed twice.
5 Installation
WARNING! Risk of personal injury.
• Mount non-mobile vacuum cleaners firmly to a hard flat surface.
• Do not place vacuum cleaner on an uneven surface.
CAUTION! Risk of equipment damage.
• Make sure hoses are properly grounded when connected, see Figure
4
.
• Make sure ejector top is properly grounded, see Figure 5.
• Connect the upper and lower ground wires to bulk-bags.
NOTE!
Follow local rules and regulations for all steps in the installation
process.