WIM | INSTALLATION GUIDE
Installation
4/20
2
INSTALLATION
2.1
SAFETY PRECAUTIONS
The following safety precautions must be observed during normal use, service and
repair.
•
Disconnect the power supply before opening the device.
•
The WIM shall only be installed and serviced by qualified and trained
personnel.
•
The WIM can be powered from a low power, Class 2 power supply, in
compliance with local regulations.
•
To be sure of safety, do not modify or add anything other than mentioned in
this manual or indicated by NEDAP N.V.
2.2
DIMENSIONS
Figure 1: WIM housing dimensions
125 mm [ 4.9 " ]
35 mm [ 1.4 " ]
130 m
m
[ 5
.1 "
]
