Nedap Convexs Series, Installation Manual And User'S Manual

Page: 13 / 21

© Nedap N.V.
Nedap Readers Installation Guide
Page 13 of 21
R
GND
UL*/NA* / BEEP
4. Convexs/Invexs connections
The Convexs/Invexs is
not
hot-swappable, so when making or changing connections be sure power is
Off
.
General:
- Check corresponding documentation of used AEpacks, Convexs converters and third party systems.
- Use correct shielded cables, cable shield must be connected to Power GND of Convexs (A2) Invexs (2)
and GND of external device (or metal case)
- Beeper can also optional be controlled by configuration settings (see chapter 5).
- Check for Invexs 190 cabling colours
4.1. Convexs Connections
4.2. Invexs 170 Connections
4.3. Invexs 190 Connections
Remark
:
•
UL*,NA*, MD* and BEEP are Open Collector to GND .
If Convexs adapters (AX1014 or AB350) are used, the original UL and NA signals
of the reader are converted to be used with UL* and NA* of the Convexs/Invexs.
•
Invexs 190 to AX1014 or AB350 needs additional connection between GND (for UL and NA) and
Antenna GND
on the AX1014 / AB350 (Invexs 190 has no separate cable for this connection)
Convexs Function
A1 Power /
XSMOD
Power in (10-30VDC) /
XS modulator (120kHz)
A2 POWER GND/shield Power Ground
A3 A (-) RS485
A4 B (+) RS485
A5 D0 Wiegand Data 0
A6 D1 Wiegand Data 1
A7 BEEP Beep input
A8 UL* UL led input
A9 GND Led/Beep Common Ground
A10 NA* NA led input
Convexs
Rear view
Invexs Function
1 Power /
XSMOD
Power in (10-30VDC) /
XS modulator (120kHz)
2 POWER GND/Shield Power Ground
3 A (-) RS485
4 B (+) RS485
5 D0 Wiegand Data 0
6 D1 Wiegand Data 1
7 BEEP Beep input
8 UL* UL led input
9 GND Led/Beep Common Ground
10 NA* NA led input
1 10
1 10 5
1 6
1
Invexs with display
Invexs without display
Wire Colour Function
w1 Red Power in (10-30VDC) /
XS modulator (120kHz)
w2 Black Power Ground / RF Ground
w3 Grey RS485 A (-)
w4 Violet RS485 B (+)
w5 Green Wiegand Data 0 (D0)
w6 White Wiegand Data 1 (D1)
w7 Yellow Beep input (BEEP)
w8 Pink UL led input (UL*)
w9 Blue MD led input (MD*)
w10 Brown NA led input (NA*)
w11 Shield / Metal EM shield (connected to power ground)
Cable shield (wire 11) must be
connected to the metal case of
the external device