NED
UME-0023-02 XCM16K80SAT8
57
8.5.2.3 Setting Camera Link
1) Input the DLL file name for Camera Link API to the edit-box,
Or click
“Browse” button and select the file.
2) Input value corresponding to the position of Camera Link cable to connect, into
“Serial
Index
” column.
3)
Click “OK” button.
Click “Cancel” button to abort setup.
Note: The camera can be used without repeating this operation after it has been set up
correctly.
Note: DLL for Camera Link API is provided by the manufacturer of the grabber board.
The grabber board can also connect through the COM port of the PC (DLL is not
provided). In this case, set the interface to the COM Port(RS232C). Please contact
the board manufacturer for details. .