NED
UME-0033-01
Sui74450T2
19
Explanation of Signals
Inner Shield:
Shield cable (GND)
X0+, X0-…X3+, X3-: Data output (Channel Link)
Xclk+,Xclk- :
Clock output for above data output synchronization (Channel Link)
SerTC+, SerTC- : Serial data input (LVDS)
, SerTFG- : Serial data output (LVDS)
CC1+,CC1- :
External synchronous signal input (LVDS) *When using External Trigger
CC2+,CC2- :
Not in use (LVDS)
CC3+,CC3- :
Not in use (LVDS)
CC4+,CC4- :
Not in use (LVDS)
Camera Link compatible cable
14B26 - SZLB - xxx - 0LC by 3M (or equivalent)
Set the LVDS, Channel Link receiver side to 100-ohm termination.
With the driver side of LVDS, even if not used, do not make it open but set the logic to H
or L.
Figure 3-3-2 Circuit of LVDS
The camera has 26-pin MDR connectors for control signals of Camera Link, data
signals and serial communications. The camera also has a 4-pin HIROSE connector for
power supply.
Figure 3-3-3 Camera Link Connector
Half pitch (miniature half ribbon) shape
Locking screw (UNC #4-40) type
+
-
100Ω
+
-
Driver
Receiver
H or L
1
14
2
15
3
16
11
24
12
25
13
26
