NED
UME-0031-03
Sui7440
57
2) Enter value corresponding to the position of Camera Link cable to connect into the
“Serial Index” column.
3) Click on the “OK” button to complete this operation.
Click on the “Cancel” button to cancel this operation.
Note: NCCtrl02 memorize settings automatically. So you do not have to repeat this
operation every time.
Frame grabber manufacturers provide the DLL file for Camera Link API.
Some frame grabber boards are connected directly to the PC’s COM port.
In this case, set the interface to COM port (RS232C).
For details, please inquire with the frame grabber manufacturer.
8.5.4.4 Setting Timeout
1) Enter timeout values to each edit-box in milliseconds.
Click "Default" button to restore all timeout values to default settings.
The meanings of each timeout are as follows.
First Receive: Maximum time, allowed to arrival of first characters after command
transmission.
Next Receive: Maximum time, allowed to elapse between the arrivals of two characters.
Send : Maximum time, allowed to completing of command transmission.
2) Click on the “OK” button to save the setting.
Click on the “Cancel” button to cancel the setting.
Note: NCCtrl02 memorizes settings automatically. So you do not have to repeat this
operation every time.
