NED
UME-0022-0
2
XCM80160CXP_60160CXP_40160CXP
23
5 Camera Control
The camera can be controlled by the frame grabber board through the camera
’s
control registers. The camera supports GenICam, and so can be easily controlled by
a GenICam-compatible frame grabber. The camera control software which came with
your frame grabber should be used for camera control.
Once the camera settings have been made and saved, the camera will operate
without further setting.
5.1 Flow of Camera Control
5.1.1 GenICam overview
The camera control register information is saved inside the camera (XML file)
The frame grabber board reads the XML file during Discovery, and acquires the
register information.
Camera control is enabled after Discovery.
5.1.2 Camera Control registers
The camera can be controlled the function through camera register by frame grabber
board.
Control Item
Address
R/W
VAL
Control Description
Width
0x0000_A000
R
8192/6144/4096
8192 Pixels (XCM80160CXP)
6144 Pixels (XCM60160CXP)
4096 Pixels (XCM40160CXP)
Height
0x0000_A004
R
1
1 Line
Acquisition Mode
0x0000_A008
R
0 to 2
Not in use
Acquisition Start
0x0000_A00C R/W
0 to 1
0=STOP/1=START
Acquisition Stop
0x0000_A010 R/W
0 to 1
0=START/1=STOP
Pixel Format
0x0000_A014 R/W 0x101 or 0x102 0x101=Mono8/0x102=Mono10
Payload Size
0x0000_A018
R
Not in use
Tap Geometry
0x0000_A01C
R
0x0000_0000
Image1StreamID
0x0000_A020
R
0x0000_0001
Image2StreamID
0x0000_A024
R
0x0000_0002
AnalogGain
0x0000_A080 R/W
0 to 20
X1.00...x11.22(1.06dB/step)
DigitalGain
0x0000_A084 R/W
0 to 511
x1...x2
