7
NOTE:
For safety reasons, lifting of the adjustable bed must always be performed by two (2) people;
and the unit should always be on a flat surface before opening.
Setting up your adjustable bed frame
1
2
Open the box and unfold the bed placing it on a flat surface
with the top side facing downward.
Remove the accessory box and cut the orange ties from inside
the bed frame.
Attaching the center support bracket
Move the three sections of the bed closer together. Make sure
the bars and frames are properly aligned at the center.
NOTE:
King and Cal King beds have two sections only.
To connect the three sections, put the center support bracket
over the bars on one side of the bed frame, lining it up with the
pre-drilled holes.
Thread 4 big knob screws fitted with spring washers into the
pre-drilled holes on the bracket and through the bed frame.
Keep the screws loose for now.
NOTE:
Make sure all the screws fit and align with the bracket
properly. Do not tighten the screws yet.
1
2
3
Installation Guide
