Instructions
for Installer,
Maintenance Engineer
and final User
SINFONIA
Rev. 00
H4345 - 00
02/2013
Page 31 of 41
7.6 Cleaning of the Vending Machine
The general cleaning of the vendor must be done to maintain the efficiency of the vendor. The following is
recommended:
•
Check the vendor and the surrounding area, check for rust on the cabinet and obstructions in the
air vents
•
Open the vending machine door and check for accumulation of water , signs of rust, and moisture
around the edges of the door.
CAUTION: DO NOT USE WATER CLEANERS AND WATER JETS
7.7 Warnings
Before doing any cleaning operations on the machine pay particular attention to the following indications:
•
Cut off power supply to the machine
•
Do not use blades or other sharp tools to scratch parts or components of the vendor
•
Do not clean the vending machine in areas under the sun or with high temperature
•
Disconnect power supply to the machine before cleaning electric parts and/or protected by cover
•
Do not use cleaning products other than those recommended
•
When cleaning with liquid products disconnect the machine from the power main
ATTENTION: REMOVE THE DUST IN FRONT OF THE CONDENSER EVERY THREE MONTHS
