Instructions
for Installer,
Maintenance Engineer
and final User
SINFONIA
Rev. 00
H4345 - 00
02/2013
Page 13 of 41
3.8 Control Settings
All the control and operation settings of the machine are set through the programming routine of the SF01
electronic board.
The programming routine of the electronic board is described in the SF01 PROGRAMMING MANUAL
supplied with the vendor.
i
REFER TO THE SF01 PROGRAMMING MANUAL
4 ACCESS TO INTERNAL PARTS
Access inside the machine (
maintenance area
) is possibile yusing the specially provided key supplied with
the vendor (rif. Fig. 4.1).
Access to the
service area
is possible only using a specially provided tool.
Hereunder is a list of the service areas of the vending machine :
•
LED (lighting area)
•
Refrigerant Unit
•
Transformer box-board
FIG. 4.1
FIG. 4.1
TRANSFORMER BOX-BOARD
COIN MECHANISM
PRODUCT DELIVERY MECHANISM
COIN BOX
