background image

NECTA SPA TECHNICAL MANUAL 

SFERA

 “ 

Manual  

“ SFERA”  

 

 

14 / 

19

 

 

 

 
 

 

 

 

 

 

 

 

 
 

 

 

 

 

 
 

 

 

 

 

 

 

 

 

  

 

 

 
 

 

 

 

 

 
 

 

 

 

 

 
 

 

 

 

 

 
 

 

 

 

 

 
 

 

 

 

 
 

 

 6– CABINET AND DOOR 

Porta vetrata  

The cabinet is made of pre-varnished sheet-metal, assembled with rivets
and various reinforcements; pre-formed polystyrene foam insulation 
panels are placed between the external pre-varnished sheet-metal part 
and the internal refrigerated box part. 
The advantage of this solution, compared to the injected polyurethane 
foam insulation, is mainly form an environmental point of view, as in 
the event of future scrapping of the machine, the cabinet can be 
disassembled completely without any complications . ( almost 
impossible in the case of cabinet injected with foam and welded)  
The base is made from sturdy sheeting, welded and varnished to obtain 
greater stability. The feet are adjustable for perfect levelling. By 
removing the lower grille a regular trans-pallet can be used for routine 
moviment of the machine. 
 
The SFERA is provided with two opening systems: main door and side 
sliding compartment. 
The main door, for loading products, is a glass front type with double 
glazing. 
The handle for opening is part of the perimeter profile of the frame, 
and locking is by means of a single lock located inside the sliding 
compartment on the right. 
A sliding compartment is located on the front right side, with the user 
interface integrated on its front panel; the CPU board and the payment 
system compartment are fitted inside on the central wall. 
The following are fitted on the front panel (user interface) : the main 
display, the coin slot and the coin return button, the selection keypad 
and the lock, that as well as ensuring a three-point lock it keeps the 
glass door closed. 
The sliding compartment is protected by a safety switch that 
disconnects the 230 V AC power, leaving anyway the option of 
operating in programming mode by inserting the special key in the 
safety switch slot. 
The dispensing compartment, with hinged hatch opened from the 
upper side, is located on the lower base; such compartment is fitted 
with an anti-theft device and anti-vandalism system that will keep it 
closed when no selections are made, permitting opening only during a 
selection. 
 

Before opening the glass door the sliding door, provided 
with a lock, must be opened. To close everything proceed 
in the reverse order, i.e. close the glass door, then push 
the sliding compartment into position and lock with the 
key.

 

Detail of polystyrene foam insulation 
and assembly with rivets 

Detail of anti-vandalism closing 
mechanism (Kit on request)

 

Summary of Contents for Sfera 6-32R / E




















Reviews: