P2125EN00
01 - 2008
TECHnICIAn MEnu
22
2.4.4 - CUSTOMiZ.STRiNGS
2.4.4.1 - ENAb. CUSTOM.STR
2.4.4.2 - PRG. CUSTOM.STR.
2.4.4
c
ustomIzed
strIngs
2.4.4.1
e
nablIng
the
customIzed
strIngs
The machine uses standard messages to give information to the
user during normal operation (e.g. “Ready”, “Take” etc.).
By enabling this function it is possible to change these messages
as necessary. Changes are stored as copies of the standard
messages.
Therefore, if this function is disabled, the standard messages will be
displayed again, but the changed messages are still stored.
2.4.4.2
P
rogrammIng
the
customIzed
strIngs
With this function it is possible to change the messages; by press-
ing the confirm button “
�
” the first character starts blinking; this can
then be changed using the “
�
” and “
�
” buttons, scrolling through
the available characters.
Once the message is completed, it can be stored by pressing button
“
�
”.
2.4.5 - COUNTER AT START
2.4.6 - CONTRAST CONTROL
2.4.5
c
ounter
at
Power
-
on
With this function it is possible to enable/disable the display of the
total number of sales since the last statistic reset, during the start-up
phase of the machine.
2.4.6
c
ontrast
control
This function is used for adjusting the electronic display contrast
between 5% and 99% (default).