22
Stitch length dial
Overedge cutting width dial
ADJUSTING STITCH LENGTH
Turn the stitch length dial until the required
length is reguired.
The higher the number, the longer the
stitch. This dial can adjust the stitch length
from 1 to 5 mm.
ADJUSTING OVEREDGE
CUTTING WIDTH
Overedge cutting width can be adjusted
from 4 to 7 mm by simply turning overedge
cutting width dial according to the kind of
fabric.
It is set at standard width of 6 mm
when
delivered from the factory.
Turn it towards " 5 " if fabric edge curls while
sewing. (Fig. 1)
Turn it towards " 7 " if loops hang off the
edge. (Fig. 2)
STITCH FINGER (B)
Loops may hang off the edge, when you
sew with lightweight fabric using 3
threads (right needle only), and setting
cutting width dial at 4 - 5 (Fig. 3). In such
a case change the stitch finger (A) to (B)
to get neat stitching (Fig. 4).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
B A
5(*2/$=,21(/81*+(==$38172
5XRWDWHLOVHOHWWRUHOXQJKH]]DSXQWRILQRDOOD
OXQJKH]]DSXQWRGHVLGHUDWD
3LDOWRqLOQXPHURSLOXQJRqLOSXQWR
,OVHOHWWRUHSXzUHJRODUHODOXQJKH]]DSXQWR
GDDPP
5(*2/$=,21($03,(==$
7$*/,2
/DPSLH]]DGHOWDJOLRSXzHVVHUH
UHJRODWDGDDPPVHPSOLFHPHQWH
UXRWDQGRODUHODWLYDPDQRSRODLQEDVHDOWHVVXWR
/DUHJROD]LRQHVWDQGDUGGHOODPSLH]]D
qPP
5XRWDWHLOVHOHWWRUHVXVHORUORVLDUURWROD
GXUDQWHODFXFLWXUDILJ
5XRWDWHLOVHOHWWRUHVXVHLOFDSSLRGLILOR
SHQGHGDOERUGRILJ
*8,'$'(/38172%
,FDSSLSRVVRQRSHQGHUHGDOERUGRTXDQGR
XWLOL]]DWHXQWHVVXWROHJJHURHILOLVROR
D J R G H V W U R H L O V H O H W W R U H D P S L H ] ] D
WDJOLRqVXILJ
,QTXHVWRFDVRFDPELDWHODJXLGDSXQWR
GD$D%SHURWWHQHUHXQDFXFLWXUD
UHJRODUHILJ
6HOHWWRUH
OXQJKH]]DSXQWR
6HOHWWRUHFRQWUROORDPSLH]]DWDJOLR
)LJ
)LJ
)LJ
)LJ
