manualshive.com logo in svg

Necchi NC-204D, Instruction Manual, Page: 78 / 92

Share
Download
Necchi NC-204D Instruction Manual Download Page 78

70

1.0~3.0

3.5~5.0

5

Applique

You can create and applique by cutting a different piece of fabric into a shape and using 

it as a decoration.

Fagoting

Stitching across an open seam is called "fagoting". It is used on blouses and children's 

clothing. This stitch is more decorative when thicker thread is used.

1

003

Cut out the applique design and baste it on 

the fabric. Sew slowly around the edge of the 

design.

① 

Basting

Trim the excess material outside the stitching. 

Make sure not to cut any stitches. Remove 

the basting.

Separate the folded edges of the fabric pieces 

with a gap of 4mm and baste them onto a 

piece of thin paper or water-soluble stabilizer 

sheet.

① 

4mm

② 

Thin paper or water-soluble stabilizer

③ 

Basting

Align the center of the presser foot with the 

center of the two pieces of fabric and begin 

sewing.
After sewing, remove the stabilizer and 

basting.

Using

 

the all purpose foot.

Using

 

the all purpose foot.

2

1

3

Summary of Contents for NC-204D





























































































Reviews:

No comments