Necchi NC-204D Instruction Manual Download

Page: 41 / 92

Clearing stitches

Use the stitch width adjustment button "+" or

"-" to select the stitch that you want to clear.
Press the clear button to delete the selected

stitch and the next stitch in the back will move

forward.

①

Clear button

Repeat setting

Under the memory mode, the reverse

button is using for repeat sewing. The stitch

combination can be sewn continuously if the

icon appeared.

Press the reverse button again to cancel

repeat sewing function, the icon will be

disappeared on LCD screen.

Note

The repeat sewing function setting returns

to off as its default setting while leave the

memory mode.

During machine is sewing, the machine

will sew 3 locking stitches at the end of the

current stitch if the auto-lock button pressed.

Then it will stop automatically. The LCD

screen will display the auto-lock icon. If

pressing the start/stop button again, it will

sew from the next stitch.

Summary of Contents for NC-204D





























































































Search results

Summary of Contents for NC-204D

Reviews:

Related manuals for NC-204D

Brands by name

Popular brands

Necchi NC-204D, Instruction Manual

Search results

Summary of Contents for NC-204D

Reviews:

Related manuals for NC-204D

Brands by name

Popular brands