Necchi NC-204D Instruction Manual Download

Page: 36 / 92

Selecting stitch

Select the desired stitch from those shown on

the stitch pattern plate.

①

Stitch pattern plate

The LED light will be set at Direct Pattern

Group. By pressing the pattern group switch

button, LED light will move step by step to

select the stitch mode.

①

Pattern group switch button

Press 2 or 3 digits under the pattern group

which selection.

Direct Pattern Group:

Use the numeric buttons 0-9 to select the

most often used stitches.

Regular Pattern Group:

Refer to stitch pattern plate, use the

number buttons 0-9 to select the

preference stitches.

Alphabet Group-Block style/Script style/

Outline style:
Refer to stitch pattern plate, use the

number buttons 0-9 to select the

preference alphanumeric stitches.

Summary of Contents for NC-204D





























































































Search results

Summary of Contents for NC-204D

Reviews:

Related manuals for NC-204D

Brands by name

Popular brands

Necchi NC-204D, Instruction Manual

Search results

Summary of Contents for NC-204D

Reviews:

Related manuals for NC-204D

Brands by name

Popular brands