Necchi NC-103D, Instruction Manual

Page: 72 / 88

64
v
Monogramming
Sew at constant speed, moving the
embroidery hoop slowly along the lettering.
When the letter is finished, secure with
reinforcement stitches at the end of the
design.
v
Darning
First sew around the edges of the hole to
secure the threads. Working from left to
right, sew over the hole in a constant and
continuous movement.
Turn the work by 1/4 and sew over the first
stitching moving the work slower over the hole
to separate the threads and not form big gaps
between the threads.
Note
Free motion darning is accomplished
without the sewing machine internal
feed system. Movement of the fabric is
controlled by the operator. It is necessary
to coordinate sewing speed and movement
of fabric.
v
Embroidery
Stitch along the outline of the design by
moving the embroidery hoop. When sewing,
make sure to maintain a constant speed.
Fill in the design working from the outline
towards the inside. Keep the stitches close
together.
You will get longer stitches by moving the
hoop faster and shorter stitches by moving
the hoop slower.
Secure with reinforcement stitches at the end
of the design.