manualshive.com logo in svg

Necchi NC-103D, Instruction Manual

Share
Download
Necchi NC-103D Instruction Manual Download Page 57

49

Blind Hem

Secure the bottom of skirts and pants with a blind hem, this stitch will sew with invisible 

stitch on the right side of the fabric.

Using

 

the blind hem foot.

9: Blind hem/lingerie for firm fabrics.

001: Blind hem for stretch fabrics.

Note

Please use the same fabric of the project 

and do a sewing test in advance.

Place the fabric under the foot. Turn the 

handwheel forwards until the needle swings 

fully to the left. It should just pierce the fold of 

the fabric. If it does not, adjust the stitch width 

accordingly. Adjust the guide by turning the 

knob so that the guide just rests against the 

fold.

① 

Knob

② 

Guide

③ 

Needle drop point

Sew slowly, guiding the fabric carefully along 

the edge of the guide.
Turn over the fabric.

① 

Wrong side

② 

Right side

Fold the fabric as illustrated with the wrong 

side up.

① 

Wrong side

② 

5mm

③ 

For heavy weight fabric

④ 

Overcasting stitch

⑤ 

For light/medium weight fabric

3

2

2

5

4

1

1

3

2

1

2

1

1.0~2.0

2.5~4.0

9

001

Summary of Contents for NC-103D

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands