manualshive.com logo in svg

Necchi NC-103D, Instruction Manual

Share
Download
Necchi NC-103D Instruction Manual Download Page 37

29

Memory program

You can save frequent-use combining stitches for future use, such as names. Since 

stored stitches are not lost after the sewing machine is turned off, they can be recalled at 

any time. 

Note

 - Multiple stitch

e

s selecting from B to D Pattern Groups can be combined and sewn together.

 - This machine has 1 program memory and each module can retain 40 units of stitches.
 - All the units in the memory can be edited to set it's function such as stitch length, stitch 

width and mirror.

 - B-Regular Pattern Group number 008-020 can not be memorized.

 

v

Combine stitches

Turn the power switch to on ("I").
Press the memory button to enter the 

memory mode. The memory screen appears 

automatically.

①

Memory button

Press pattern group switch button to select 

the pattern group from B to D. 

①

Pattern group switch button

Press the desired stitch number directly. (e.g. 

023) 
The selected stitch number displays on the 

LCD screen.
Repeat step several times for stitches 

combination. 
Up to 40 characters can be combined in one 

memory module.

Summary of Contents for NC-103D

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands