background image

Battery Information 

 

XN120 Battery Box Guide 

 

 

     11 

Battery Care 

This is a guide only please follow any information that is supplied by the battery manufacturer. 
 

Never leave the batteries in a discharged state. 

The battery back up duration will be reduced if the battery is left discharged for long periods of time. 
Replace the batteries if you suspect they have been left discharged 
 

Recommended Operating Temperature – 20

o

C. 

Higher temperatures will reduce the battery life. 
Lower temperatures will reduce the battery back up duration. 
 

Ventilation. 

Although the batteries are of a sealed (valve regulated) type gases may be released from the batteries. 
Do not install the battery box in a sealed enclosure. 
 

Never short-circuit the battery terminals. 

There is a risk of explosion. 
The battery may be damaged and will need to be replaced. 
 

Batteries are heavy – 1.12Kg each. 

Although the batteries used with the battery box are relatively small the weight of the battery box is 5.2Kg when 
the batteries are installed. 
 

Do not tamper with the battery. 

The battery contains hazardous liquid and gas. 
Never try to open the batter

y

 case. 

Do not bend the battery terminals. 
 

Disposing of batteries. 

Return old batteries to the battery supplier 

or 

a licensed battery dealer. 

Do not dispose of batteries into a 

waste 

bin. 

Do not incinerate batteries. 

Summary of Contents for XN120 Vision












Reviews: