May 2001
System Hardware Manual
5 - 109
A6-32
400
0-6
42-0
1
–
R
e
le
as
e 4
.0
Ma
y 2
001
13.
Power off system when upload is completed.
14.
Remove the CPUB( )-U13 card.
15.
Return SW1 and SW3 to their normal position.
16.
Remove EPROM
17.
Install the CPUB( )-U13 ETU again.
18.
Power on system and operate as normal.
19.
Save data base with a compatible MAT (refer
supplier for relevant information)
3.2
EXP-U13 ETU (Xen Master Only)
3.2.1
Description
The EXP-U13 ETU is the Expansion KSU Controller for
the Xen Master system. This ETU controls data
transmission between the CPUB( )-U13 ETU and the other
ETUs installed in the expansion KSU if it is installed. Refer
to Figure 5-8 EXP-U13 ETU.
Figure 5-8 EXP-U13 ETU