76
Exiting Viewer
To exit Viewer, switch to another input such as Computer, DVI (DIGITAL/ANALOG), Video, S-Video or LAN.
* To switch to another input, there are two ways:
* Press the COMPUTER or VIDEO button on the remote control.
* Press the MENU button on the remote control to display the Viewer menu. Press the MENU button again to
display the main menu and select the input from the [Source] submenu.
With this function it is possible to switch directly to a slide when the picture of a VCR or computer is being projected.
Example: When conducting presentations using a combination of slides and moving pictures from a VCR, etc., it is
possible to switch from a Viewer slide to the video picture then back to the Viewer slide simply by using the Viewer
button.
NOTE: Even if you switch the current Viewer source to another source, the current slide is retained. When you return back to the
Viewer, you will get the slide that has been retained.
Viewing Digital Images
Digital images can be played with the Viewer if the following conditions are met:
•
If the image can be stored on an MS-DOS format PC card.
•
If the image can be stored in a format supported by the Viewer. With the Viewer, images on the card are
searched for in directories and images in JPEG, BMP, non-interlaced GIF or non-interlaced PNG format are
recognized as slides.
NOTE: The maximum number of images recognized as slides within one directory is about 1000.
5. Using the Viewer
