NEC VN-212, User Manual

Page: 25 / 45

25
Searching for Particular Scenes
This video recorder will wind a tape forward or backward quickly to search for
particular scenes on the tape.
Fast forward (FF)
Pressing the fast forward (FF) button with the tape in STOP mode, the video
recorder will rapidly wind the tape forward. The display “FF” will appear on the TV
screen and on the Multi-Function Display briefly.
Rewind (REW)
Pressing the rewind (REW) button with the tape in STOP mode, and the video
recorder will rapidly wind the tape backward. The display “REW” will appear on the
TV screen and on the Multi-Function Display briefly.
Logic Search
While holding down either FF(during Fast Forward mode) or REW(during Rewind
mode), from the STOP mode, the picture will be watched at 9 times (NTSC recorded
tape: 7 times) faster than the normal playback speed (SP or LP recorded tape). When
you have reached the desired point of the tape, release the button (REW or FF) and
press PLAY.
Picture Search (CUE & REVIEW)
During playback, press either of the search buttons (REW or FF) to search for a
particular section of the tape. The indicator REV or CUE will appear on the
Multi-Function Display. When the desired point in the tape has been located, press
PLAY to return to the normal playback mode. Visual searching will only continue for
about 3 minutes, then it will return to playback mode.
NOTES:
●
While searching, the audio portion is automatically muted.
●
While searching, noise streaks may appear in the picture.
G.CODE
CHILD LOCK
SKIP
REW
AV
OPERATE
CH/TRK
CH/TRK
CH/TRK
CH/TRK
FF
CH/TRK
CH/TRK
CH/TRK
CH/TRK
CH/TRK
CH/TRK
Tracking Adjustment
When a tape recorded on another VCR is played back, noise bars and snow may appear in the picture. Use the
tracking procedures described below to stabilize the image and improve the picture quality.
Digital Auto-Tracking
When playback starts, Auto-Tracking functions automatically, optimizing the picture quality.
NOTES:
●
Auto-Tracking will function during playback.
●
If the quality of the recording is poor, or if the tape is damaged, the automatic tracking may not function correctly.
In such cases, you have to remove the distortions manually.
Manual Tracking
Press CH/TRK ( D D / E E ) to obtain the optimum picture. These buttons can also be used
during searching to move noise bars up or down the screen.
NOTE:
Tracking is automatically set to normal whenever a cassette is inserted or the VCR’s power cord is plugged in.
G.CODE
CHILD LOCK
SKIP
AV
OPERATE
CH/TRK
CH/TRK
CH/TRK
CH/TRK
CH/TRK CH/TRK
CH/TRK CH/TRK
CH/TRK
CH/TRK
CH/TRK
CH/TRK